Montana V6-3.4L VIN E (2002)
7. Remove the O-ring seal (11) from the vehicle speed sensor (10).
Important: Handle the vehicle speed sensor (10) carefully.
8. Inspect the vehicle speed sensor and O-ring seal for the following:
^
Damaged connector
^
Cracked housing
^
Signs of rotor damage
^
Cuts or nicks on the O-ring seal (11)
Installation Procedure
1. Install the O-ring seal (11) to the vehicle speed sensor (10).
2. Install the vehicle speed server to the extension case.
Notice: Refer to Fastener Notice in Service Precautions.