Montana AWD V6-3.4L VIN E (2004)
Notice: Refer to Fastener Notice in Service Precautions.
Important: This is a prevailing torque type fastener. This fastener may be reused ONLY if:
^
The fastener and its counterpart are clean and free from rust.
^
The fastener develops 2 Nm (18 lb in) of torque/drag against its counterpart prior to the fastener seating.
If the fastener does not meet these criteria, REPLACE the fastener.
3. Install the NEW ball stud nuts.
^
Tighten the NEW ball stud nuts to 68 Nm (50 lb ft).
4. Install the lower control arm.