Montana AWD V6-3.4L VIN E (2004)
Control Arm Bushing: Service and Repair
Front Suspension
Lower Control Arm Bushings Replacement
^
Tools Required
-
J 21474-01 Control Arm Bushing Service Set
-
J 34126 Sprocket Bearing Remover
-
J 35379 Front Knuckle Support
-
J 23444-A Extreme Pressure Lubricant - 1/4 Ounce Tube
Removal Procedure
1. Remove the lower control arm.
2. Secure the lower control arm in a vice.
3. Mark the lower control arm along the flat edge of the bushing flange.
Important: Apply J 23444-A, or equivalent high pressure lubricant, to the threads of the J 21474-27.