Montana SV6 V6-3.9L (2007)
8. Remove the outside handle from the door, including the disconnecting rod.
9. Pull the door harness through hinge face into door cavity and remove the door module (1).
Installation Procedure
1. Position the front door hardware module to the front door.
2. Align the modular locator pin (1) into the 4-way locating hole (2) in the door structure.
Notice: refer to Fastener Notice.
3. Install the front door module screws.
Tighten the screws, in sequence as shown, to 10 N.m (89 lb in).