Montana SV6 V6-3.9L (2007)
4. Install the 3 (1) door to latch (2) screws.
Tighten the screws, in sequence as shown, to 10 N.m (89 lb in).
5. Install the outside handle including the rod connect.
6. Remove the tape on the glass and install the glass to the door module sash.
7. Load the door wiring harness through the hinge face and attach to the body harness.
8. Install the front door water deflector.
9. Install the front door speaker.
10. Install the door trim panel.
