pontiac Workshop Repair Guides

Pontiac Workshop Service and Repair Manuals

Accumulator HVAC|Service and Repair|Page 8323 > < Wheel Fastener|Front|Page 8318
Page 1
background image

Accumulator HVAC: Service and Repair

ACCUMULATOR REPLACEMENT

TOOLS REQUIRED

J 39400-A Halogen Leak Detector

REMOVAL PROCEDURE

1. Recover the refrigerant. Refer to Refrigerant Recovery and Recharging.
2. Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle.
3. Remove the cruise control bracket. Position aside the bracket (if equipped).
4. Remove the refrigerant tubes from the accumulator (1). Discard the O-ring seals.
5. Remove the accumulator bracket (3).
6. Remove the accumulator (1) from the vehicle.

INSTALLATION PROCEDURE

1. Install the accumulator (1).

NOTE:  Refer to Fastener Notice in Service Precautions.

2. Install the accumulator bracket (3) clamp.

Tighten
Tighten the bolt to 8 N.m (71 lb in).

Accumulator HVAC|Service and Repair|Page 8323 > < Wheel Fastener|Front|Page 8318