Sunfire L4-144 2.4L DOHC VIN T SFI (2001)
Vacuum Harness HVAC: Service and Repair
VACUUM HOSE HARNESS REPLACEMENT
REMOVAL PROCEDURE
1. Remove the HVAC module assembly.
2. Disconnect the yellow hose (1) from the mode actuator (2).
3. Disconnect the red hose (3) from the mode actuator (2).
4. Remove the vacuum hose harness clips (4) from the HVAC module assembly.
5. Disconnect the blue hose (1) from the defroster actuator (2).
6. Disconnect the green hose (5) from the defroster actuator (2).
7. Disconnect the violet hose (3) from the vacuum tank (4).
8. Disconnect the orange hose (6) from the air inlet actuator (7).
9. Remove the vacuum hose harness clip screw.
10. Remove the vacuum hose harness.
INSTALLATION PROCEDURE
