Torrent AWD V6-3.4L VIN F (2006)
3. Remove the caps or plugs from both the engine and chassis EVAP purge hose/pipes.
4. Connect the engine EVAP purge hose/pipe to the chassis EVAP purge hose/pipe.
5. Connect the EVAP purge hose/pipe (2) to the purge solenoid.
6. Install the nuts (1) securing the evaporative emission EVAP hose/pipe (2) to the strut tower.
Tighten the nuts to 10 N.m (89 lb in).
NOTE: Refer to Fastener Notice in Service Precautions.
7. Install the generator.