Vibe L4-1.8L VIN L (2003)
![background image](/pontiac/vibe/l4-1.8l_vin_l/Page-2079003.png)
4. Install the rear seat assembly.
Garnish Molding Replacement - Windshield Pillar
GARNISH MOLDING REPLACEMENT - WINDSHIELD PILLAR
REMOVAL PROCEDURE
Gently pry and remove the windshield side garnish molding (1) from the vehicle.
INSTALLATION PROCEDURE
Install the windshield side garnish molding (1) to the vehicle. Ensure that the plastic retainers are fully engaged.
Garnish Molding Replacement - Body Side Lower Rear
Garnish Molding Replacement - Body Side Lower Rear
Removal Procedure
1. Remove the rear seat assembly. Refer to Seat Replacement - Rear (See: Seats/Service and Repair/Seat Replacement - Rear) in Seats.
2. Remove the bolt (2).
3. Remove the rear seat hinge (3).
4. Gently pry the rear body side lower garnish molding plastic retainers and remove the molding (1) from the vehicle.