Vibe L4-1.8L VIN L (2003)
9. Install the dome lamp wiring harness to the 2 hangers on the sunroof housing.
10. Install the 2 side rail roof panel insulators (1) to roof panel. Secure each of the insulators with 2 plastic retainers (2).
11. Install the 4 sunroof housing drain hoses to the sunroof housing (1). Secure each drain hose (2) with the hose clamp.
12. Install the sunroof actuator (4) to the roof panel. Secure the actuator with the 3 bolts (1).
Tighten the sunroof actuator bolts to 5.4 N.m (48 lb in).
13. Connect the sunroof actuator and sunroof control module electrical connectors.
14. Install the sunroof air deflector (1) to the sunroof housing. Secure the deflector with the 2 screws.
15. Install the sunroof window (1) to the vehicle. Secure the window with 2 screws (2) at each side. Do not tighten fully.
16. Adjust the sunroof window as necessary. Refer to Sunroof Window Height and Opening Fit Adjustment (See: Adjustments) .