Vibe L4-1.8L VIN L (2003)
Child Seat Tether Attachment: Service and Repair
Child Restraint Tether Anchor Replacement (Upper)
REMOVAL PROCEDURE
1. Remove the rear access panel (2).
2. Remove the following components from the vehicle:
-
The bolt (3)
-
The child seat anchor bracket (4)
INSTALLATION PROCEDURE
1. Install the child seat anchor bracket (4) to the vehicle. Secure the bracket with the bolt (3).
NOTE: Refer to Fastener Notice in Service Precautions.
Tighten
Tighten the child seat anchor bracket bolt to 20 N.m (15 lb ft).
2. Install the rear access panel (2).