Vibe L4-1.8L VIN L (2003)
19. Align the match marks on the intermediate shaft (4) and on the steering shaft coupling (3).
20. Install the lower coupling bolt (6).
Tighten the bolt to 35 Nm (25.8 ft. lbs.).
21. Tighten the upper coupling bolt (7).
Tighten the bolt to 35 Nm (25.8 ft. lbs.).
22. Place the silencer pad into the correct position.
Notice:
Refer to Using Proper Power Steering Fluid Notice in Service Precautions.
See: Service Precautions/Vehicle Damage Warnings/Using Proper Power Steering Fluid Notice
23. Fill the power steering fluid reservoir.
Notice:
Refer to Air in the Power Steering System Notice in Service Precautions.
See: Service Precautions/Vehicle Damage Warnings/Air In the Power Steering System Notice
24. Bleed the power steering system.
25. Inspect the power steering system for leaks. Repair as necessary.
26. Measure the wheel alignment. Adjust as necessary.
