Vibe FWD L4-1.8L VIN 8 (2004)
31. Place a power source, 12V minimum/2A minimum, i.e., a vehicle battery, near the shorted end of the harness.
32. Separate the 2 ends of the driver side air bag deployment harness wires.
IMPORTANT: The rapid gas expansion involved with deploying an air bag is very loud. Notify all people in the immediate area that you intend to
deploy the inflator module.
33. Connect the driver side air bag deployment harness wires to the power source in order to deploy the side impact module - left.
34. Disconnect the driver side air bag deployment harness wires from the power source.
35. Separate the 2 ends of the passenger side air bag deployment harness wires.
36. Connect the passenger side air bag deployment harness wires to the power source in order to deploy the side impact module - right.
37. Disconnect the passenger side air bag deployment harness wires from the power source.