911 Carrera (997) F6-3.6L (2006)
Spoiler: Removal and Replacement
Removing and Installing Wiring Harness For Rear Spoiler
Removing And Installing Wiring Harness For Rear Spoiler
Information
Note on removing and installing wiring harness for rear spoiler
INFORMATION:
-
The wire harness for rear spoiler is not available as spare part.
-
If the wire harness for the rear spoiler must be replaced, this is only possible together with the spoiler drive.
Removing and Installing Spoiler Drive
Removing And Installing Spoiler Drive
Technical values
Removing spoiler drive
Removing upper part of spoiler
1. Press out plastic stopper -1- (-arrow A-).
2. Unscrew clamping screw -2- by about 2 to 3 turns and remove upper part of spoiler -3- in an upward direction -arrow B-.
Removing lower part of spoiler
1. Unscrew fastening nuts -1- from the lower part of the spoiler -2- and hinge -3-. Remove threaded plate -4-.