911 Carrera (997) F6-3.6L (2006)
2. Unscrew fastening screws -5- from the lower part of the spoiler and spoiler drive. Remove the plate -6-.
Removing spoiler drive
1. Release plug connection for rear wire harness -inset- and disconnect.
2. Remove auxiliary brake light. Refer to Removing and installing auxiliary brake light.
3. Pull out grommet -A- with the auxiliary stop light line. Release connector -B- on the engine compartment fan and pull off. Pull off engine
compartment lighting connector -C-. Check retaining clip -arrows-, replace if necessary.
4. Unscrew fastening screws -22 und 23- from the spoiler drive -24-.
5. Pull off both connectors on motor for spoiler drive -2-.