911 Carrera (997) F6-3.6L (2006)
/f6-3.6l/Page-656008.png)
Removing and Installing the Rear Pccb Brake Disc
Removing and installing the rear PCCB brake disc
Tools
Preliminary work
Go to Removing and installing wheel'
General warning notes
WARNING: Risk of accidents if brake pads and/or brake discs are not replaced in time.
^
Danger of injury and damage to vehicle if braking effect is impaired.
^
The brake pads must be replaced when the brake pad warning indicator lights up, but no later than when there is a residual pad
thickness of 2 mm.
ATTENTION: Increased risk of damage to brake discs when mounting/removing wheels.
^
The brake discs can be damaged.
^
Use assembly aid (assembly pins) in order to exclude any possibility of heavy contact of the wheel with the brake disc.
Removing mar brake disc
WARNING: Risk of accidents if brake pads and/or brake discs are not replaced in time.
^
Danger of injury and damage to vehicle if braking effect is impaired.
^
The brake pads must be replaced when the brake pad warning indicator lights up, but no later than when there is a residual pad
thickness of 2 mm.
ATTENTION: Increased risk of damage to brake discs when mounting/removing wheels.
^
The brake discs can be damaged.
^
Use assembly aid (assembly pins) in order to exclude any possibility of heavy contact of the wheel with the brake disc.
1. The adjustment fixture can be twisted through the bores in the wheel mounting.
