911 Carrera (997) F6-3.6L (2006)
/f6-3.6l/Page-268006.png)
^
Use the cover for dust protection when fitting the engine NR.165 on the engine assembly support.
Note:
^
It is only possible to remove the bearing cover with the engine installed in vehicles with manual transmission.
^
In Tiptronic vehicles, the complete engine/transmission unit must be removed.
Note: Always observe specified engine number range.
Note:
^
The same sealing ring and installation/removal procedure applies as for the "old" bearing cover.
^
The new bearing cover can only be retrofitted along with the new intermediate shaft up to model year 2002 (M96/03).
Overview of bearing covers for intermediate shaft.
^
A - Bearing cover 996.105.024.01
^
B - Bearing cover 996.105.024.06
^
C - New collar nut, M12 1.25
