911 Carrera (997) F6-3.6L (2006)
Collar nut for bearing cover
5. Insert primary chain tensioner with new aluminum sealing ring (hexagon a/f 32) and tighten to the specified torque. -> Tightening torque: 59 ftlb.
Primary chain tensioner
6. Insert chain tensioner for cylinder 1-3 with new aluminum sealing ring (hexagon a/f 32) and tighten to the specified torque. -> Tightening torque:
59 ftlb.
Chain tensioner, cylinder 1-3
7. Fasten coolant pipe (heating), cylinder side 4-6, with two M6 x 12 hexagon-head bolts. -> Tightening torque: 7.5 ftlb.
8. Fit two new closure caps on cylinder head cover.
9. Pull fixing pin out of the crankshaft belt pulley.
Subsequent work for bearing cover for intermediate shaft
Tiptronic transmission:
1. Install drive plate for converter.
2. Refit Tiptronic transmission.
3. Install engine.