911 Carrera (997) F6-3.6L (2006)
-1- and pressure pin on piston pin.
44. Press piston-pin circlip with pressure pin -1- onto piston pin; while doing so, press assembly tube -2- firmly onto piston pin. This will move the
piston-pin circlip into the correct installation position.
45. Check installation position of piston-pin circlip in assembly tube.
46. Insert assembly tool 9602/1 with piston pin circlip and piston pin through the centering aid 9602/5 into the crankcase. Press piston pin into
assembly bore of piston/connecting rod eye.