911 Carrera (997) F6-3.6L (2006)
/f6-3.6l/Page-285016.png)
^
Drei Bond or Loctite 1209 (optional)
17. Prepare crankcase half 4-6 to fit it onto crankcase half 1-3. Carefully grease sealing faces of both halves with acetone. Align connecting rods 4-6
vertically upwards and fold timing chain.
18. Apply sealant to the sealing face of crankcase half 4-6.
19. With the help of a second person, place crankcase half 4-6 in position on crankcase half 1-3. Knock gently on crankcase half -6 using a plastic
hammer. Pull timing chain out through chain space using a bent welding wire.
20. Position four new, coated M6 35 Torx screws -1- on flywheel side.
