911 Carrera (997) F6-3.6L (2006)
Inserting piston-pin circlip into assembly tube
42. Insert pressure pin -1- carefully into assembly tube -2-, ensuring that the circlip does not pop out.
Pressure pin in assembly tool
43. Oil piston pin -3- with new engine oil and place it in an upright position on a clean surface on the workbench. Position assembly tube with circlip
-1- and pressure pin on piston pin.
Assembly tool on piston pin
44. Press piston-pin circlip with pressure pin -1- onto piston pin; while doing so, press assembly tube -2- firmly onto piston pin. This will move the
piston-pin circlip into the correct installation position.