911 Carrera (997) F6-3.6L (2006)
Air Door Actuator / Motor: Service and Repair
Removing and Installing Servo Motor For Temperature Mixing Flap (Pink)
Removing And Installing Servo Motor For Temperature Mixing Flap (Pink)
Technical values
Preliminary work
Preliminary work - servo motor for temperature mixing valve
1. Remove left and right covers of console.
2. Remove front footwell outlet vent.
Removing servo motor for temperature mixing flap
1. Switch off ignition and remove ignition key.
2. First unscrew the two accessible fastening screws -1-, then shift the servo motor and unscrew the third fastening screw -1-.