911 Carrera (997) F6-3.6L (2006)
Coolant: Service and Repair
Drain/Refill
Draining and filling in coolant
Preliminary work
1. Remove rear underbody panel.
Draining coolant
Information
^
Check Henn coupling O-rings and replace them if necessary.
^
Clean plug connection and coolant hoses before assembly.
^
Coat O-rings and coolant hoses with Kluberplus Gel (Part No. 000.043.205.93).
^
Remove stoppers before fitting the coolant lines and hoses.
Warning
Hot pressurized coolant.
^
Danger of scalding and burning.
-> Only work on the coolant system when the engine is "cool".
-> Wear protective clothes, gloves and goggles.
1. Open cap on the expansion tank -1- and remove it. Set the steel clip on the bleeder valve in a vertical position -2-.
Expansion tank cap for coolant expansion tank