911 Carrera (997) F6-3.6L (2006)
6. Position mounting head approximately 15 cm to the right of valve and pull the second tire bead (upper tire bead) onto rim.
WARNING: If the tire seating pressure is too high (max. 4 bar permissible), personal injuries due to possible tire or wheel destruction
are possible.
- Maximum tire seating pressure 4 bar! This value must not be exceeded!
- For tire seating pressure over 3.3 bar (possible in the event that several unfavorable factors should occur simultaneously/max. 4.0 bar
permissible) use a tire filling cage.
7. Remove entire wheel from tire fitting unit. Without valve insert, fill tire with air until tire beads slide over hump (to a maximum of 4.0 bar).
8. Screw in new valve insert and fill tire to specified tire pressure. Screw on valve cap.
Wheels and Tires/Tire Pressure
Wheels and tires/tire pressure