911 Carrera (997) F6-3.6L (2006)
/f6-3.6l/Page-715008.png)
5. Remove connector from connector housing -arrow C-.
6. Release connector guide on both sides -arrow a- and remove from the contact strip.
NOTE: Allocation of lines - see wiring diagram.
7. Release contacts of the damaged lines using the press-out tool 1575-1P of the press-out and unlocking tools for flat and round plug connections of
all sizes NR.155 -arrow a- and pull out of the contact strip.
8. Cut off the contacts of the damaged lines, isolate them and secure them to the main wire harness with tie-wraps.
9. Release connector on triggering unit for airbag -10- and fold open the locking lever.
10. Using a small screwdriver, lever the seal out of the connector housing.
