911 Carrera (997) F6-3.6L (2006)
/f6-3.6l/Page-715009.png)
11. Cut and remove tie-wrap for fixing the wire harness to the connector housing.
12. Release connector housing with a small screwdriver, lift upwards and remove from connector.
13. Lift connector guide and remove from connector.
NOTE: Allocation of lines - see wiring diagram.
14. Release contact of the damaged line using the press-out tool 1575-1P of the press-out and unlocking tools for flat and round plug connections of
all sizes NR.155 -arrow a- and pull out of the contact strip.
