911 Carrera 2 Coupe F6-3600cc 3.6L SOHC (1990)
![background image](/porsche/911_carrera_2_coupe/f6-3600cc_3.6l_sohc/Page-1628014.png)
2
-
Remove covers
Unscrew and remove fastening screw of the cover on the dashboard.
3
-
Disconnect the electrical plug connection
-
Disconnect the electrical plug connection of the windscreen antenna and fasten the windscreen lead with adhesive tape.
4
-
Remove defroster covers
Unscrew and remove fastening screws from the defroster cover.
5
-
Separate windscreen
1.
Fit a cutting knife -D1- to the cutter -C-.
Note!
Observe the prescribed cutting direction!
1.
Insert cutting knife -D1- into the rubber seal, and set the frequency controller to level 6. Cut through the bond between the windscreen and
the window frame upwards from below in both -directions of the arrows-.