911 Carrera 2 Coupe F6-3600cc 3.6L SOHC (1990)
Preparing the window section for installation
1
-
Remove adhesive from the window frame
When removing remaining adhesive -1- with the cutting tool -C-, and the flashing knife -D- on the window frame, ensure that a surface coating
of adhesive remains -2-.
Note!
The surface coating of adhesive remaining helps new adhesive to stick. Keep cut surfaces clean and free of grease and do not clean with
cleaning solution.
2
-
Clean and prime paint damage or newly built-up paint areas in the window aperture of the window frame
-
Clean new paint areas or damage to the top coat paint in the non-visible area of the window aperture in the window frame with cleaning
solution -H1- and patch with primer -H2-.
Note!
A ventilation period of at least 10 minutes must be observed between the cleaning of the glass section and the application of the primer! No cleaning
solution residues may remain on the window frame or the body.
Preparing the windscreen for installation
1
-
Remove adhesive from the windscreen
Note!