911 Carrera 2 Targa F6-3600cc 3.6L SOHC (1992)
2. If the vehicle is fitted with a catalytic converter, separate the plug connection to the Lambda probe, removing the hot-air blower beforehand.
3. Push the probe cable with rubber grommet downwards through the engine paneling on the left-hand side.
4. Undo the front fastening screws on the engine side paneling beforehand.
(4 screws M 6 x 10)
Assembly work from below:
1. Remove the engine guard.
2. Remove the exhaust system complete (except heat exchanger).
3. Remove the side encapsulation panels from the engine.
4. Undo the side engine paneling.
