911 Carrera 2 Targa F6-3600cc 3.6L SOHC (1992)
5. Disconnect the spark plug sockets from the upper and lower ignition circuits.
6. Remove the valve covers for intake and exhaust.
Note: The clearance for intake and exhaust valves can now be checked and/or adjusted from below.
Installation of ignition leads on exhaust valve covers differs, so that valve covers must not be mixed up when installed.
Check for perfect seating of spark plug connectors and routing of ignition leads.
Left Side Cyl. 1-3
Right Side Cyl. 4-6
