911 Carrera 2 Targa F6-3600cc 3.6L SOHC (1992)
Clutch Disc: Testing and Inspection
Inspecting Clutch Plate (Driven Plate) 87 Models Onward
-
Inspect splines. The clutch plate must move easily on the transmission shaft without any radial play.
-
Check rivets, spring plates and torsion elements for secureness, cracks or signs of damage. In case of doubt, replace clutch plate.
-
Inspect clutch lining. If the lining is oily, burnt, cracked or unevenly worn, install a new clutch plate.
-
Check thickness of clutch plate lining.
Size new (compressed) 9.3 ± 0.3 mm
Size worn (compressed) 7.5 mm with symmetrical wear.
NOTE: Clutch linings cannot be replaced.
-
Check clutch plate for lateral run-out at lining. Permissible lateral run-out max. 0.6 mm, measured approx. 2-3 mm from circumference.