911 Carrera 2 Targa F6-3600cc 3.6L SOHC (1992)
Clutch Pedal Assembly: Adjustments
NOTE: The following items are essential requirements for smooth clutch operation and must therefore be observed whenever the pedal is
adjusted:
^
Correct bleeding of clutch hydraulics.
^
Tightness of hydraulic system.
^
Correct setting of boost spring.
^
Pedal travel limited by correctly set floorboard stop.
^
Fitting position of pedals according to standard specification.
Checking the Pedal Return (return force)
-
With the pedal in home position, pull pedal back with a force of 30 N min. (using a spring balance). The pedal must not yield, If it does (= return
force insufficient), the boost spring preload must be reduced or set to a dimension of 6 mm.
Boost Spring Adjustment
-
Adjusting the boost spring (dimension A = 6 mm).
-
Adjustment is made by rotating the hex socket head bolt. The clearance between screw and pivot must be 6 mm.
Checking the Pedal Travel