911 Carrera 2 Targa F6-3600cc 3.6L SOHC (1992)
2
-
Apply bonding material to the windscreen
-
Apply 2-component bonding material with the adhesive gun -A- to the windscreen along the preliminary layer or on the primer as a triangular
run measuring -X approx. 10 mm-.
Note!
When applying the adhesive it is essential to ensure that the adhesive pass overlaps by approx. 30 mm at the beginning and at the end.
3
-
Insert the windscreen into the window frame
Note!
Two persons are needed to insert and adjust the windscreen.
1.
Apply suction cups -B-to the windscreen and insert the windscreen into the window aperture. Position the windscreen on the lower edge of
the window.
2.
Set the dimension -X- at the seam joining line along the lower edge of the window frame "Test and adjustment values" in 64-113
4
-
Clean the fields of vision
1.
Adhesive which has oozed out must be removed immediately and the affected fields of vision must be cleaned using cleaning agent -H1-.
