911 Carrera 4 Cabriolet (996) F6-3.4L (1999)
/f6-3.4l/Page-445004.png)
11. Loosen the three M8 SW 13 fastening screws -arrows- on the oil container. Carefully remove oil container.
Installing Oil Container
1. Replace the sealing ring between inlet line and check valve.
2. Position oil container on the mounting points on the engine, screw in fastening screws (SW 13) and tighten. Make sure that the inlet line is
positioned correctly on the check valve.
Tightening torque: 23 Nm (17 ftlb.)
3. Tighten inlet line between the oil container and the engine. To do so tighten the two M6 x 16 hexagon-head bolts -arrow-.
Tightening torque 10 Nm (7.5 ftlb.)
