911 Carrera 4 Cabriolet (996) F6-3.4L (1999)
4. Push positive crankcase ventilation hose onto the flange and tighten the screw-in clip -arrow-.
5. Position the union nut on the return line -arrow- and tighten with an SW 32 open-ended wrench. Make sure to counter with an SW 32 open-ended
wrench at the oil container.
Tightening torque of union nut M30 x 1.5 60 Nm (44 ftlb.)
6. Connect the oil level sender cable plug -bottom arrow-.
7. Tighten union nut on the return line with an SW 32 open-ended wrench on the oil container -top arrow-. Make sure to counter with an SW 32
open-ended wrench at the oil container, Push the bleeder hose onto the flange and tighten the screw-in clip -bottom arrow-.
Tightening torque of union nut M30 x 1.5 60 Nm (44 ftlb.)