911 Carrera 4 Cabriolet (996) F6-3.4L (1999)
/f6-3.4l/Page-889004.png)
10. Place transmission jack under the transmission and remove transmission support.
11. From the passenger compartment, press rubber sleeve out to the rear and pull B+ wire out of the slotted sleeve.
Installation
1. Screw on cable end piece by 12 ± 0.5 mm.
2. Position rubber sleeve.
3. Apply a generous coating of lubricant (e.g. Contifix tire mounting paste) on the rubber sleeve and B+ wire in the area of the body opening.
4. Cable through the body opening from behind. Take care not to soil the passenger compartment.
