911 Carrera 4 Cabriolet (996) F6-3.4L (1999)
/f6-3.4l/Page-957002.png)
2. Support manual transmission in installation position with the transmission jack and remove the transmission support.
3. Fasten transmission to the transmission holder with the two fastening screws.
4. Detach cardan shaft at the transmission side and press it off the transmission flange with two mounting levers.
5. Pull cardan shaft out of the splines of the central shaft and remove.
6. Remove bellows from the central shaft.
Installation
Install in reverse order, observing the following points:
1. Always replace bellows for cardan shaft.
