911 Carrera 4 Cabriolet (996) F6-3.4L (1999)
/f6-3.4l/Page-957003.png)
2. Slide assembly sleeve 9255 over the shaft splines, lightly lubricate sleeve with Vaseline and push on the bellows to the stop.
3. Grease bushing with approximately 3 g of Olista Longtime 3EP.
4. Grease splines of the cardan shaft with Olista Longtime 3 EP. Slide shaft into the central shaft splines and fit on the transmission side.
5. Push bellows forward until it engages in the groove of the central shaft. Check whether the bellows is seated properly by pulling on it.
Tightening torques
