911 Carrera 4 Cabriolet (996) F6-3.4L (1999)
4.1.2 Grease and attach the selector cable --> Figure 9 -A-, then install protective cap --> Figure 9 -B-.
4.1.3 Grease and install shift cable --> Figure 9 -C-. To do this, insert a large screwdriver through the side opening in the gearshift bracket and
press shift cable on to the ball head.
4.1.4 Insert support --> Figure 9 -D- in gearshift bracket secure with locking clips --> Figure 9 -E-.
4.2
Check shifting in all gears.
4.3
Install center console --> POSES, Workshop Manual, Serv. No. 6817 "Installing Center console".
4.4
Test drive.
working Time
References: --> POSES Workshop Manual, Serv. No. 6817 - "Removing and installing center console".
Disclaimer