911 Carrera 4 Cabriolet (996) F6-3.6L (2003)
Variable Valve Timing Actuator: Removal and Replacement
Hydraulic Valve For Camshaft Adjustment - Engine Installed
Removing and installing hydraulic valve for camshaft adjustment - engine installed
Caution
Risk of soiling! Absolute cleanliness is essential when working with hydraulic valves!
Removing hydraulic valve for camshaft adjustment
Information
^
The rear muffler must be removed and the holder must be detached before the hydraulic valve on cylinder bank 4 - 6 can removed!
Figure shows cylinder side 1-3
1. Remove the side shield on the respective side of the engine. Unscrew the two M6 hexagon-head bolts for this purpose.
2. Remove cable plug of the hydraulic valve -1- by pressing the clip and pulling off the cable plug.