911 Carrera 4 Cabriolet (996) F6-3.6L (2003)
3. Unscrew the three M6 x 20 hexagon-head bolts (micro-encapsulated) on the intermediate-shaft flange. Replace screws during installation.
4. Position special tool puller 9673 on the bearing cover grooves.
Rear view of puller on bearing cover
5. Turn the locking lever for pulling out the bearing cover anticlockwise -left arrow- and tap the slide hammer gently against the lock nuts several
times. At the same time, hold the puller tightly with the other hand.