911 Carrera 4S (997) F6-3.8L (2007)
Communications Control Module: Service and Repair
Removing And Installing Control Unit For Telephone
Technical values
Tightening torques for telephone control unit
-
Tightening torque: 3.5 ftlb.
-
Tightening torque: 1.5 ftlb.
Removing control unit for telephone
1. Unscrew the two fastening screws -1- and rotate the cover and telephone control unit by 180 °.
WARNING:
Risk of damage to electronic control modules.
-
If care is not taken, electrical and electronic components may be destroyed.
-
Before removing the control module, switch off the ignition and remove the ignition key.