911 Carrera 4S Coupe AWD F6-3600cc 3.6L SOHC (1997)
Oil Temperature Regulator (Part 1 Of 2)
1. Remove right-hand side member panel. Undo rear wheel housing liner in oil filter area.
2. Undo oil filter with Special Tool 9204.
3. Apply a thin coat of oil to seal of new oil filter. Tighten oil filter manually until seal is seated firmly. To tighten fully, turn by approx. another 1/2
turn.
NOTE: Check oil level at operating temperature and idle speed (refer to Owner's Manuals). Check engine, oil reservoir, pipes and front oil cooler
for leaks (visual inspection)