911 Carrera Cabriolet (996) F6-3.4L (1999)
21 -
Installing tension strap on the tension bow
Position tension strap -41- on tension bow -21- on the holes provided, rivet on the tension strap -41- with the pop rivets -43- (parts scope
component of convertible-top covering)
NOTE: Refer to "Additional assembly instructions for installing tension strap as of model year 2002 (convertible top with glass window)".
22 -
Installing plastic panel
1. Insert fastening clip -44a- onto the tab of the plastic panel -44- from behind and turn 90 degrees clockwise.
2. Position plastic panel -44- on roof frame 1 -11- and screw in with the fastening screws -45-.
Tightening torque: 5 Nm (3.5 ftlb.).
Additional assembly instructions for installing tension strap as of model year 2002 (convertible top with glass window)
23 -
Installing tension strap and bracing strap on the tension bow
NOTE: Position the bracing strap -41a- as illustrated.
Position tension strap -41- and bracing strap -41a- on the holes provided on the tension bow -21- rivet on the tension strap -41- with the pop
rivets -43- (parts scope component of convertible-top covering)
Installing styling frame