911 Carrera Cabriolet (996) F6-3.4L (1999)
24 -
Installing styling frame on roof frame 3
1. Screw on draught deflector -46- on the front face of the styling frame -48- with the fastening screw -47-.
Tightening torque: 1.7 Nm (1.0 ftlb.)
1. Position styling frame on roof frame 3 -8- and tighten with fastening screws -49-.
Tightening torque: 1.7 Nm (1.0 ftlb.)
25 -
Installing styling frame on roof frame 2
1. Screw on fabric guide plate -50- and styling frame -51- with the torx screws T 15 -52- and the washers -52a-.
Tightening torque: 1.7 Nm (1.0 ftlb.)
1. Position styling frame -51- on roof frame 2 -5-. Adjust gap dimension -A = 3.1 + 0.5- between styling frames 2 and styling frame 3 -48-.
Screw on fastening screws -53- and the washers -53a-.
Tightening torque: 9 Nm (7 ftlb.)
Installing seals on the styling frame