911 Carrera Cabriolet (997) F6-3.6L (2007)
/f6-3.6l/Page-136012.png)
INFORMATION: When loosening or tightening the M8 refrigerant lines on the condenser, always counter with a 21 mm open-ended wrench.
1. Unscrew the fastening screw -1- for the line condenser and pull the line out of the condenser.
2. Pull the line out of the line holder.
3. Counter the fastening nuts -2- and open carefully.
INFORMATION:
-
Before re-installing the component, check the O-rings of the refrigerant lines for damage and replaced them if necessary.
-
Wet the O-rings of the refrigerant lines with refrigerant oil.
-
Do not open the plugs for the lines and connections until shortly before installation.
-
Close off all lines and connections using suitable plugs during removal.