911 Carrera Cabriolet (997) F6-3.6L (2007)
Tire Pressure Module: Service and Repair
WM 443419 Removing and installing tire pressure monitoring system control unit
Preliminary work
Preliminary work for tire pressure monitoring system (RDK) control module
Removing tire pressure monitoring system (RDK) control unit
Removing tire pressure monitoring system (RDK) control module
Warning
Risk of damage to electronic control modules.
^
If care is not taken, electrical and electronic components may be destroyed.
--> Before removing the control module, switch off the ignition and remove the ignition key.
The control module is located beside the brake booster in the luggage compartment.
1. Unscrew fastening nuts -1-.
2. Loosen fastening nut -2- and remove the control module.
3. Release the electrical plug -A- and fold up lock.
4. Remove control module.
Installing tire pressure monitoring system (RDK) control unit
Installing tire pressure monitoring system (RDK) control module
1. Connect electrical plug to control module and lock plug -B-.