911 Carrera Cabriolet (997) F6-3.6L (2007)
/f6-3.6l/Page-480006.png)
3. Unscrew fastening screws -Pfeil- for electromagnetic control unit and remove control unit.
Installing the electrohydraulic control unit
Installing the electrohydraulic control unit
Note
The selector lever must be in position P in order to fit the electrohydraulic control unit.
1. Insert electrohydraulic control unit into the transmission from below. The selector valve must engage in the driver of the notched plate.
2. Screw in fastening screws and tighten hand tight.