911 Carrera Cabriolet (997) F6-3.6L (2007)
/f6-3.6l/Page-480007.png)
3. Tighten fastening screws.
4. Thinly coat gasket on the suction collar of the ATF filter with Vaseline and insert filter from below into electromagnetic control unit.
5. Clean ATF pan and place on transmission with new seal.
6. Screw in screws and tighten them crosswise. --> Tightening torque: 8 Nm (6.0 ftlb.)
Assembly work
1. Insert the socket with new seals in the correct position and tighten the fastening screw.
2. Insert electrical plug into socket and lock by turning clockwise.