911 Carrera Cabriolet (997) F6-3.6L (2007)
Flywheel: Service and Repair
WM 136019 Removing and Installing Double-Mass Flywheel
Preliminary work
Preliminary work for double-mass flywheel
1. Remove manual transmission.
2. Remove clutch.
Removing double-mass flywheel - 3.6 l
Removing double-mass flywheel - 3.6 l
Component overview
^
1 - Double-mass flywheel, 3.6 l
^
2 - Fastening screw for double-mass flywheel, (8 M10 screws)
^
3 - Clutch plate
^
4 - Clutch pressure plate
^
5 - Fastening screw for clutch pressure plate, (6 M8 screws)
Note: The toothed segment 9538/1 must be bored to diameter 15 mm to guarantee a perfect fit and to avoid damaging the thread in the crankcase.
1. To counter, fit toothed segment 9538/1 to the crankcase using an M12 x 50 hexagon-head bolt (fine thread).